Innovative characteristic products
乔扬数控联系电话
产品中心广告
PRV-V line rail seriesLocation:Home >> Product >> PRV-V line rail series >> PRV-V8 machining center(line rail)
PRV-V8 machining center(line rail)
PRV-V8 machining center(line rail)

Product category:PRV-V line rail series

Product overview:

Product inquiry:
Product consulting

This product has been viewed2645 time

  • Product Details
  • Structure
  • Specification
  • Video Display
  • Catalogue

  1. The characteristics of PRV-V8 machining center
  PRV-V line rail series, high precision machining center machine series
  The stability and precision are combined, the cutting ability is outstanding, and the high quality parts and components are efficiently produced.
  PRV-V Taiwan high-end machine category model, in the case of the spare parts processing industry heavy cutting processing, dare to challenge the sale of the same type of products, easy to achieve the improvement of production efficiency. The machining dimensions are accurate and consistent, suitable for high volume auto parts, precision hardware and machinery parts, digital electronic processing.
  1) Machine tool castings are meehanite cast iron, the material is stable and strong enough to withstand high speed motion and processing without deformation.
  2) Use the precision C3 level mute ball screw and P level mute line rail, high-speed movement no noise, no fever reduce due to thermal deformation error and precision castings, to ensure high precision and long service life.
  3) Fast and precise, high accuracy, and stable processing.
  4) The high speed movement of imported special cover is the best waterproof.
  2. The technical specification parameters of PRV-V8 machining center 

Model specification
Unit
PRV-V8
X axis travel
Mm
800
Y axis travel
Mm
500
Z axis travel
Mm
500
Distance from spindle nose to worktable
Mm
145-645
Distance from spindle center to column
Mm
620
Worktable size
Mm
1050 x 500
Table T groove
Mm
5x18x100
The maximum load working table
Kg
450
Spindle speed
RPM
20000
Spindle taper
 
BT40-140
Fast feed XYZ
m/min
48\48\48
feed rate
Mm/min
0-10000
XYZ roller guide
Mm
35, 35, 35
XYZ axis screw
Mm
4016,4016,4016
Tool capacity
 
24T/16T
Positioning accuracy
Mm
0.005
Repeat accuracy
 
± 0.005
The total volume of air pressure
Kg/cm
6
Weight of machine
T
4.5
Control system
 
Mitsubishi
Spindle motor
KW
7.5
X axis motor
KW
2
Y axis motor
KW
2
Z axis motor
KW
3
  3. The standard configurations of PRV-V8 machining center  
 number
project
number
project
1
BT40 spindle belt
10
High pressure water gun, air gun
2
High pressure cutting fluid pump
11
Water filtration system
3
Cooling air blowing system
12
Back flushing system
4
Cutting blowing system
13
Mobile control hand wheel
5
Automatic lubrication
14
Combination plate
6
Strengthen the protection of the whole closed type cover
15
Handle and nozzle combination cable
7
Sealing steel cover
16
Network transmission port or R232 interface
8
Luxury explosion-proof lamp
17
Horizontal adjusting bolt and foundation block
9
Luxury indicator
18
Operation manual
  4. The selection configurations of PRV-V8 machining center 
number
project
number
project
1
SIEMENS,FANUC,MITSUBISHI
9
Automatic aligning instrument
2
Direct drive spindle 10000/12000/15000/24000rpm
10
Heightening column 250mm
3
Spiral plate / chain scraper type chip removal device / chip
11
Automatic tool length measurement device
4
Hat / disc knife library (16T\20T\24T)
12
High performance automatic voltage regulator
5
High performance electric control box heat exchange
13
Spindle center water
6
A set of spindle oil cooling device
14
The main shaft ring spray water
7
Container scrap car
15
Disc type oil-water separator
8
The rotary table (fourth axis)
 

Welcome your message, we will answer your questions as soon as possible!
Company:
Name: *
Phone: *
E-mail: *
Content: *
   
Previous Article:PRV-V6 machining center (line rail)
Next Article:None!
<< Return
The five core advantages of Joyou
联系方式
HOME| ABOUT US| PRODUCTS| CASE CENTER| EXPERIENCE| SUPPORT| NEWS CENTER| CONTACT US| MAIL| SITEMAP|
Copyright:  Joyou  CNC  equipment  machine  CO.,LTD
website:  www.joyouglobal.com
Customer  service  service:  4006-989899  E-mail:service@joyoucnc.com
Sales  Consultant:  13913951346/18029022055  QQ:375603453  E-mail:sales@joyoucnc.com

Jiangsu  base:  Xi  Qiao  Industrial  Zone,Xi  Qiao  Town,Huaian  District,Huaian  City,Jiangsu  province  Tel:  0517-80861198/99  Fax:  0517-85452998
Guangdong  base:Building  3    ShangLing  Industrial  Zone,Hengli  Town,Dongguan  City,GuangDong  province.    Tel:  0769-89237099  Fax:0769-82223766     
Main business: Drilling and Tapping machineGraphite processing machining centerHorizontal machining centerCNC gantry grinding machineMilling machine(The second generation of finish milling machine)Horizontal milling machineHorizontal side milling machinePlane milling machineFixed beam precision gantry milling machineCNC gantry milling machinePRV hard rail seriesPRV-GH line rail seriesDRV gantry seriesPRV-L line rail seriesPRV-V line rail seriesGrinding Machining center
Technical support:SHENZHEN YIWANGTUO